# Which Problems Are Solved
There were still some emails (passkey registration and domain claimed)
sent with links pointing to login v1 even when the login v2 was enabled
for the instance.
Also while looking into the issue, it was discovered that some links
pointing to login V2 were not correctly generated.
# How the Problems Are Solved
- Added default paths for passkey registration and domain claimed
notifications
- Fixed the existing paths to properly handle concatenation (resp. use
`url.ResolveReference`)
- Change their go types (from string) to `*url.URL`
- Added a mapstructure hook for string to url
- Removed unnecessary `InstanceSetupFeatures` and corresponding
conversions
- Refactored the methods on the `login.DefaultPaths` struct and added an
interface to the `Commands` to only need to pass a single config (and
not every method)
- Added an `OriginURL` method to the `DomainCtx` to prevent going from
url to string and back
- Added the use of the templates in case of enabled login v2 for passkey
registration and domain claimed)
# Additional Changes
None
# Additional Context
closes#10643
---------
Co-authored-by: Max Peintner <[email protected]>
Co-authored-by: Livio Spring <[email protected]>
Co-authored-by: Livio Spring <[email protected]>
Co-authored-by: Max Peintner <[email protected]>
Co-authored-by: Gayathri Vijayan <[email protected]>
# Which Problems Are Solved
Streams allow differentiating logs produced by different components of
Zitadel.
# How the Problems Are Solved
The `backend/v3/instrumentation/logging` package now exposes convenience
function for setting and getting a logger from the context. As well as
high-level functions to emit log records at various levels. When
constructing a new logger a "stream" needs to be specified:
- **runtime**: General runtime logs, such as startup and shutdown
messages. Default for logs that do not belong to the other categories.
- **request**: Logs for incoming API and HTTP requests.
- **event_handler**: Logs for event handling in projections.
- **queue**: Logs for the job queue processing.
- **event_pusher**: Logs for event pushing to the database. Disabled by
default, contains sensitive information.
Each line from the returned logger contains a `stream` field as well as
a `version` field with the current Zitadel version.
## Runtime config
Streams can be enabled by passing an array of stream names in the
runtime config. Because some log streams may contain sensitive data
(especially events), it is now also possible to mask values by their
key.
# Additional Changes
- Wrap `slogctx` in the `logging` package. (Except API error converter
packages, because of import cycle)
- Add some docs to `logging` package so other devs understand how to add
logging to Zitadel
- Add `logging.OnError` and `logging.WithError` helper functions with
`Panic()` and `Fatal()` methods, to preserve current calls in the `cmd`
packages.
- Add instance context extractor.
- Only output request details in the request info log. Request ID
remains propagated through context.
- Moved middleware functionality into protocol specific packages.
- Removed setting of URI to context in metric middleware. There were ony
setters and no getters. (Unused value)
- Reuse a single statusWriter in the middleware package for middlewares
that need to know the response status.
# Additional Context
- Closes#11333
- Closes#11331
- Partly #11330
---------
Co-authored-by: Silvan <[email protected]>
# Which Problems Are Solved
Zitadel did not provide easy correlation between errors, logs, traces
and metrics. The configuration for those instrumentations was also not
consistent, with some supporting different exporters then others.
Implementation and parsing of config was also spaghettified over
multiple packages, with awkward parsing and inconsistent naming of
options.
# How the Problems Are Solved
All telemetry is now merged under the name "instrumentation". Why?
1. We thought it was a good idea in the past to call the milestone
exporter `Telemtry` in the runtime config. Calling this `TelemetryV2`
looks weird.
2. Not everything is a meter and not everything is sent (tele...).
3. It's also
[defined](https://opentelemetry.io/docs/concepts/instrumentation/) as
such by the OTEL documentation.
## New features
- Adds structured, context based logging with trace-ID awareness
- Static log fields are added to the context, such as service and
request path
- Static log fields are injected in each logline emitted by the
application
- Structured logs can also be send to an otel exporter
- Structured logs can be printed to StdErr in text and JSON format
- Error sinks make sure every error is logged at the correct level:
- Warnings for client side errors (HTTP 400 range, Invalid request etc)
- Error for server side errors (Internal server errors)
- Metrics can now also be send to a OTEL collector. (previously they
could only be scraped from `/debug/metrics` with prometheus)
## Exporters
This change adds all the exporters supported by OTEL upstream and some
google specific exporters for our cloud deployment.
- StdOut / StdErr: all instrumentations
- OTEL gRPC / HTTP: all instrumentations
- Google: all instrumentations except logging
- Prometheus (pull-based): only metrics
The exception is profiling, which only supports the google exporting due
to lack of support by OTEL upstream.
## Configuration and structure
- All instrumentation is moved into the new `backend/v3/instrumentation`
package. It reuses configuration types, so both code and runtime
configuration are easier to understand.
- The `internal/telemetry` packages are removed.
- Instrumentation is started with a single function and a proper
shutdown function is now provided.
- Legacy configuration is still parsed from the runtime config, as long
as the new configuration is disabled. This allows backporting this
feature to v4 without breaking existing configurations.
# Additional Changes
- Devcontainer: set `$PATH` variable so installed go binaries can be run
individually, without NX.
- NX: install GCI tool to fix imports
# Additional Context
- Closes https://github.com/zitadel/zitadel/issues/8408
- Closes https://github.com/zitadel/zitadel/issues/6664
- Backport to v4
<!--
Please inform yourself about the contribution guidelines on submitting a
PR here:
https://github.com/zitadel/zitadel/blob/main/CONTRIBUTING.md#submit-a-pull-request-pr.
Take note of how PR/commit titles should be written and replace the
template texts in the sections below. Don't remove any of the sections.
It is important that the commit history clearly shows what is changed
and why.
Important: By submitting a contribution you agree to the terms from our
Licensing Policy as described here:
https://github.com/zitadel/zitadel/blob/main/LICENSING.md#community-contributions.
-->
One-time recovery codes are a common multi-factor authentication (MFA)
backup method, letting users access their account if they lose other MFA
devices. Support for recovery codes can also reduce support burden for
users locked out of their accounts and provide a more secure and
reliable form of verification than security questions.
# Which Problems Are Solved
Zitadel currently lacks support for recovery codes.
# How the Problems Are Solved
This PR partially addresses recovery code support in Zitadel.
Importantly, it adds recovery codes as a new 2FA `Factor` and an
additional `Check` type for the Session API.
```
Example recovery code flow:
1. User generates N new recovery codes using `POST /v2/users/{user_id}/recovery_codes`
2. Zitadel hashes and stores these codes and returns the un-hashed codes in the response
3. User creates new session with an additional check: `recoveryCode`
4. Code is checked against hash and, if valid, cannot be used again
5. User attempts to adds N more codes using the same endpoint
6. If `remaining_codes + N <= RecoveryCodes->MaxCount` config value, then recovery codes are added in addition to original codes
7. User can remove all recovery codes using `DEL /v2/users/:userId/recovery_codes`
```
This PR adds:
- [x] Session recovery_code check support on `POST+PATCH /v2/sessions`
endpoints
- [x] Adds `mfa_recovery_code_checked_at` column (default null) to
`projections.sessions8` table
- [x] Support for `SECOND_FACTOR_TYPE_RECOVERY_CODES` as available 2FA
method on login policy
- [x] Support for importing recovery codes in /import code
Missing, will _not_ implement in this PR:
- [ ] Admin console support for displaying Recovery Code settings for
user(s)
- [ ] Zitadel Typescript login support for recovery codes
TODO:
- [x] Additional unit and integration tests
- [x] Error translations
# Additional Changes
None
# Additional Context
- Closes#6898
---------
Co-authored-by: Livio Spring <[email protected]>
This PR is still WIP and needs changes to at least the tests.
# Which Problems Are Solved
To be able to report analytical / telemetry data from deployed Zitadel
systems back to a central endpoint, we designed a "service ping"
functionality. See also https://github.com/zitadel/zitadel/issues/9706.
This PR adds the first implementation to allow collection base data as
well as report amount of resources such as organizations, users per
organization and more.
# How the Problems Are Solved
- Added a worker to handle the different `ReportType` variations.
- Schedule a periodic job to start a `ServicePingReport`
- Configuration added to allow customization of what data will be
reported
- Setup step to generate and store a `systemID`
# Additional Changes
None
# Additional Context
relates to #9869
<!--
Please inform yourself about the contribution guidelines on submitting a
PR here:
https://github.com/zitadel/zitadel/blob/main/CONTRIBUTING.md#submit-a-pull-request-pr.
Take note of how PR/commit titles should be written and replace the
template texts in the sections below. Don't remove any of the sections.
It is important that the commit history clearly shows what is changed
and why.
Important: By submitting a contribution you agree to the terms from our
Licensing Policy as described here:
https://github.com/zitadel/zitadel/blob/main/LICENSING.md#community-contributions.
-->
# Which Problems Are Solved
A customer reached out that after an upgrade, actions would always fail
with the error "host is denied" when calling an external API.
This is due to a security fix
(https://github.com/zitadel/zitadel/security/advisories/GHSA-6cf5-w9h3-4rqv),
where a DNS lookup was added to check whether the host name resolves to
a denied IP or subnet.
If the lookup fails due to the internal DNS setup, the action fails as
well. Additionally, the lookup was also performed when the deny list was
empty.
# How the Problems Are Solved
- Prevent DNS lookup when deny list is empty
- Properly initiate deny list and prevent empty entries
# Additional Changes
- Log the reason for blocked address (domain, IP, subnet)
# Additional Context
- reported by a customer
- needs backport to 2.70.x, 2.71.x and 3.0.0 rc
# Which Problems Are Solved
Currently ZITADEL defines organization and instance member roles and
permissions in defaults.yaml. The permission check is done on API call
level. For example: "is this user allowed to make this call on this
org". This makes sense on the V1 API where the API is permission-level
shaped. For example, a search for users always happens in the context of
the organization. (Either the organization the calling user belongs to,
or through member ship and the x-zitadel-orgid header.
However, for resource based APIs we must be able to resolve permissions
by object. For example, an IAM_OWNER listing users should be able to get
all users in an instance based on the query filters. Alternatively a
user may have user.read permissions on one or more orgs. They should be
able to read just those users.
# How the Problems Are Solved
## Role permission mapping
The role permission mappings defined from `defaults.yaml` or local
config override are synchronized to the database on every run of
`zitadel setup`:
- A single query per **aggregate** builds a list of `add` and `remove`
actions needed to reach the desired state or role permission mappings
from the config.
- The required events based on the actions are pushed to the event
store.
- Events define search fields so that permission checking can use the
indices and is strongly consistent for both query and command sides.
The migration is split in the following aggregates:
- System aggregate for for roles prefixed with `SYSTEM`
- Each instance for roles not prefixed with `SYSTEM`. This is in
anticipation of instance level management over the API.
## Membership
Current instance / org / project membership events now have field table
definitions. Like the role permissions this ensures strong consistency
while still being able to use the indices of the fields table. A
migration is provided to fill the membership fields.
## Permission check
I aimed keeping the mental overhead to the developer to a minimal. The
provided implementation only provides a permission check for list
queries for org level resources, for example users. In the `query`
package there is a simple helper function `wherePermittedOrgs` which
makes sure the underlying database function is called as part of the
`SELECT` query and the permitted organizations are part of the `WHERE`
clause. This makes sure results from non-permitted organizations are
omitted. Under the hood:
- A Pg/PlSQL function searches for a list of organization IDs the passed
user has the passed permission.
- When the user has the permission on instance level, it returns early
with all organizations.
- The functions uses a number of views. The views help mapping the
fields entries into relational data and simplify the code use for the
function. The views provide some pre-filters which allow proper index
usage once the final `WHERE` clauses are set by the function.
# Additional Changes
# Additional Context
Closes#9032
Closes https://github.com/zitadel/zitadel/issues/9014https://github.com/zitadel/zitadel/issues/9188 defines follow-ups for
the new permission framework based on this concept.
# Which Problems Are Solved
- Adds infrastructure code (basic implementation, error handling,
middlewares, ...) to implement the SCIM v2 interface
- Adds support for the user create SCIM v2 endpoint
# How the Problems Are Solved
- Adds support for the user create SCIM v2 endpoint under `POST
/scim/v2/{orgID}/Users`
# Additional Context
Part of #8140
# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes#8931
# Which Problems Are Solved
Add a cache implementation using Redis single mode. This does not add
support for Redis Cluster or sentinel.
# How the Problems Are Solved
Added the `internal/cache/redis` package. All operations occur
atomically, including setting of secondary indexes, using LUA scripts
where needed.
The [`miniredis`](https://github.com/alicebob/miniredis) package is used
to run unit tests.
# Additional Changes
- Move connector code to `internal/cache/connector/...` and remove
duplicate code from `query` and `command` packages.
- Fix a missed invalidation on the restrictions projection
# Additional Context
Closes#8130
# Which Problems Are Solved
We identified the need of caching.
Currently we have a number of places where we use different ways of
caching, like go maps or LRU.
We might also want shared chaches in the future, like Redis-based or in
special SQL tables.
# How the Problems Are Solved
Define a generic Cache interface which allows different implementations.
- A noop implementation is provided and enabled as.
- An implementation using go maps is provided
- disabled in defaults.yaml
- enabled in integration tests
- Authz middleware instance objects are cached using the interface.
# Additional Changes
- Enabled integration test command raceflag
- Fix a race condition in the limits integration test client
- Fix a number of flaky integration tests. (Because zitadel is super
fast now!) 🎸🚀
# Additional Context
Related to https://github.com/zitadel/zitadel/issues/8648
# Which Problems Are Solved
To have more insight on the performance, CPU and memory usage of
ZITADEL, we want to enable profiling.
# How the Problems Are Solved
- Allow profiling by configuration.
- Provide Google Cloud Profiler as first implementation
# Additional Changes
None.
# Additional Context
There were possible memory leaks reported:
https://discord.com/channels/927474939156643850/1273210227918897152
Co-authored-by: Silvan <[email protected]>
# Which Problems Are Solved
Implement a new API service that allows management of OIDC signing web
keys.
This allows users to manage rotation of the instance level keys. which
are currently managed based on expiry.
The API accepts the generation of the following key types and
parameters:
- RSA keys with 2048, 3072 or 4096 bit in size and:
- Signing with SHA-256 (RS256)
- Signing with SHA-384 (RS384)
- Signing with SHA-512 (RS512)
- ECDSA keys with
- P256 curve
- P384 curve
- P512 curve
- ED25519 keys
# How the Problems Are Solved
Keys are serialized for storage using the JSON web key format from the
`jose` library. This is the format that will be used by OIDC for
signing, verification and publication.
Each instance can have a number of key pairs. All existing public keys
are meant to be used for token verification and publication the keys
endpoint. Keys can be activated and the active private key is meant to
sign new tokens. There is always exactly 1 active signing key:
1. When the first key for an instance is generated, it is automatically
activated.
2. Activation of the next key automatically deactivates the previously
active key.
3. Keys cannot be manually deactivated from the API
4. Active keys cannot be deleted
# Additional Changes
- Query methods that later will be used by the OIDC package are already
implemented. Preparation for #8031
- Fix indentation in french translation for instance event
- Move user_schema translations to consistent positions in all
translation files
# Additional Context
- Closes#8030
- Part of #7809
---------
Co-authored-by: Elio Bischof <[email protected]>
# Which Problems Are Solved
ZITADEL currently selects the instance context based on a HTTP header
(see https://github.com/zitadel/zitadel/issues/8279#issue-2399959845 and
checks it against the list of instance domains. Let's call it instance
or API domain.
For any context based URL (e.g. OAuth, OIDC, SAML endpoints, links in
emails, ...) the requested domain (instance domain) will be used. Let's
call it the public domain.
In cases of proxied setups, all exposed domains (public domains) require
the domain to be managed as instance domain.
This can either be done using the "ExternalDomain" in the runtime config
or via system API, which requires a validation through CustomerPortal on
zitadel.cloud.
# How the Problems Are Solved
- Two new headers / header list are added:
- `InstanceHostHeaders`: an ordered list (first sent wins), which will
be used to match the instance.
(For backward compatibility: the `HTTP1HostHeader`, `HTTP2HostHeader`
and `forwarded`, `x-forwarded-for`, `x-forwarded-host` are checked
afterwards as well)
- `PublicHostHeaders`: an ordered list (first sent wins), which will be
used as public host / domain. This will be checked against a list of
trusted domains on the instance.
- The middleware intercepts all requests to the API and passes a
`DomainCtx` object with the hosts and protocol into the context
(previously only a computed `origin` was passed)
- HTTP / GRPC server do not longer try to match the headers to instances
themself, but use the passed `http.DomainContext` in their interceptors.
- The `RequestedHost` and `RequestedDomain` from authz.Instance are
removed in favor of the `http.DomainContext`
- When authenticating to or signing out from Console UI, the current
`http.DomainContext(ctx).Origin` (already checked by instance
interceptor for validity) is used to compute and dynamically add a
`redirect_uri` and `post_logout_redirect_uri`.
- Gateway passes all configured host headers (previously only did
`x-zitadel-*`)
- Admin API allows to manage trusted domain
# Additional Changes
None
# Additional Context
- part of #8279
- open topics:
- "single-instance" mode
- Console UI
* feat(api): feature API proto definitions
* update proto based on discussion with @livio-a
* cleanup old feature flag stuff
* authz instance queries
* align defaults
* projection definitions
* define commands and event reducers
* implement system and instance setter APIs
* api getter implementation
* unit test repository package
* command unit tests
* unit test Get queries
* grpc converter unit tests
* migrate the V1 features
* migrate oidc to dynamic features
* projection unit test
* fix instance by host
* fix instance by id data type in sql
* fix linting errors
* add system projection test
* fix behavior inversion
* resolve proto file comments
* rename SystemDefaultLoginInstanceEventType to SystemLoginDefaultOrgEventType so it's consistent with the instance level event
* use write models and conditional set events
* system features integration tests
* instance features integration tests
* error on empty request
* documentation entry
* typo in feature.proto
* fix start unit tests
* solve linting error on key case switch
* remove system defaults after discussion with @eliobischof
* fix system feature projection
* resolve comments in defaults.yaml
---------
Co-authored-by: Livio Spring <[email protected]>
Even though this is a feature it's released as fix so that we can back port to earlier revisions.
As reported by multiple users startup of ZITADEL after leaded to downtime and worst case rollbacks to the previously deployed version.
The problem starts rising when there are too many events to process after the start of ZITADEL. The root cause are changes on projections (database tables) which must be recomputed. This PR solves this problem by adding a new step to the setup phase which prefills the projections. The step can be enabled by adding the `--init-projections`-flag to `setup`, `start-from-init` and `start-from-setup`. Setting this flag results in potentially longer duration of the setup phase but reduces the risk of the problems mentioned in the paragraph above.
* define roles and permissions
* support system user memberships
* don't limit system users
* cleanup permissions
* restrict memberships to aggregates
* default to SYSTEM_OWNER
* update unit tests
* test: system user token test (#6778)
* update unit tests
* refactor: make authz testable
* move session constants
* cleanup
* comment
* comment
* decode member type string to enum (#6780)
* decode member type string to enum
* handle all membership types
* decode enums where necessary
* decode member type in steps config
* update system api docs
* add technical advisory
* tweak docs a bit
* comment in comment
* lint
* extract token from Bearer header prefix
* review changes
* fix tests
* fix: add fix for activityhandler
* add isSystemUser
* remove IsSystemUser from activity info
* fix: add fix for activityhandler
---------
Co-authored-by: Stefan Benz <[email protected]>
* start feature flags
* base feature events on domain const
* setup default features
* allow setting feature in system api
* allow setting feature in admin api
* set settings in login based on feature
* fix rebasing
* unit tests
* i18n
* update policy after domain discovery
* some changes from review
* check feature and value type
* check feature and value type
* pipeline runs on ubuntu instead of docker
* added Makefile to build zitadel core (backend) and console (frontend)
* pipeline runs in parallel where possible
* pipeline is split into multiple jobs
* removed goreleaser
* added command to check if zitadel instance is running
* feat(instance): implement create instance with direct machine user and credentials
* fix: deprecated add endpoint and variable declaration
* fix(instance): update logic for pats and machinekeys
* fix(instance): unit test corrections and additional unit test for pats and machinekeys
* fix(instance-create): include review changes
* fix(instance-create): linter fixes
* move iframe usage to solution scenarios configurations
* Revert "move iframe usage to solution scenarios configurations"
This reverts commit 9db31f3808e6dfcae9907bc574c072436a19865a.
* fix merge
* fix: add review suggestions
Co-authored-by: Livio Spring <[email protected]>
* fix: add review changes
* fix: add review changes for default definitions
* fix: add review changes for machinekey details
* fix: add machinekey output when setup with machineuser
* fix: add changes from review
* fix instance converter for machine and allow overwriting of further machine fields
Co-authored-by: Livio Spring <[email protected]>
Marco A.andGitHub
LarsandGitHub
Elio BischofandGitHub
